Universal patch translator

C1ZZL3 Import Lab

Bring in a Casio CZ SysEx patch, decode its amplitude, DCW, and DCO pitch envelopes, then map DCW1/DCW2 and DCO1/DCO2 into the shared C1ZZL3 Envelope Lab.

What it does Decodes CZ patch data including separate DCW and DCO envelopes

Amplitude, DCW1, DCW2, DCO1 pitch, DCO2 pitch, separate Line 1/Line 2 oscillator wave types, and performance values are mapped into a full dual-oscillator C1ZZL3 draft. Single-line CZ patches are detected and mirrored into both C1ZZL3 oscillator lanes.

How to use it Send separate oscillator lanes

DCA1/Amp1, DCW1/PD1, DCO1 pitch, and Line 1 wave type drive oscillator 1; DCA2/Amp2, DCW2/PD2, DCO2 pitch, and Line 2 wave type drive oscillator 2 where the connected card supports dual lanes. Older firmware receives a safe collapsed version.

Open Envelope Lab

Import

Select a CZ `.syx` file
Waiting for a file
Waiting for file
No patch loaded
Name, size, and patch confidence will appear here.

Summary

What the browser found
No decoded patch yet.
Amplitude, PD, and 8-wave family mapping will be previewed here.
High / Medium / Low
Draft preset for Envelope Lab
No draft created yet.

Decoded Data

Detailed readout 
Raw parameter bytes, interpreted envelopes, waveform family, and unsupported features will appear here.

Warnings

What may not translate cleanly
  • Waveform behavior is approximate.
  • Pitch envelope decoding is approximate and may need adjustment in Envelope Lab.
  • CZ has separate DCA/DCW/DCO envelopes per synth line; choose line 1, line 2, or merged mappings to compare translations.
  • Modulation details may be dropped in the first pass.
  • Only files that pass the CZ frame checks are treated as draft candidates.

Draft Mapping

C1ZZL3 values
No draft yet.
No draft yet.
No draft yet.
No draft yet.
No draft yet.
No draft yet.
No draft yet.
No draft yet.
No draft yet.
No draft yet.

Next Step

Send the decoded draft into the shared Envelope Lab
Shared C1ZZL3 Import Lab: sends the richest decoded draft to the Envelope Lab, then the editor collapses or expands the payload to match the connected firmware.