CVMod

CVMod is a card inspired by Make Noise's MultiMod module. Its development is recorded in a ~3 hour video stream

CVMod simulates a loop of tape (up to 8 seconds long) onto which one channel of CV is recorded. Four tape 'read heads' move around the tape loop and their values are output onto jacks.

Controls/Jacks

• Audio In 1 jack: CV input
• Audio/CV Out 1/2: four CV outputs
• Knob X (+ CV in 1): duration of tape loop
• Main Knob (+ Audio in 2): speed of read heads. Speed matches record head when main knob is at 12-o'clock (top right LED lit)
• Knob Y (+ CV in 2): phase of read heads (offset from recording head)
• Switch down: Reset position of read heads
• Switch up: toggle through read head motion types: Ramp/Saw/Triangle/Sin/Stepped